1701 Aspen Ave NW, Unit W
Albuquerque, NM  87104
+1(505) 247-4222
+1(505) 247-4555
info@independentradiator.com

Diesel Particulate Filter (DPF)

Why let Independent Radiator clean your DPF Filters?

Independent Radiator is Albuquerque’s number one DPF cleaning specialist. Our equipment is capable of cleaning any size, make or model filter and our expertise extends to any problem filter, whether it has high sulfur and hydro carbon build up or is oil contaminated or is coolant soaked. We offer a 24 hour or less turn-around on all cleaning procedures.

We offer gaskets and clamps for all applications and service kits for Duramax, Powerstroke and Cummins pick-up applications.

DPF Cleaning Process

Process Description
Filter is tested before cleaning for vacuum pressure (restriction) and it is weighed. The filter is then subjected to a pneumatic cleaning process with combined vacuum and air pressure to extract the particulates from the filter. Post blast the testing process is repeated and checked against the initial test results to ensure a sufficient differential to confirm the filter is as clean as possible.
Only recommended if time is limited or service interval is shorter than OEM.

After a stage one blasting, the filter is subjected to a four stage eight hour thermal bake in a special oven. This four stage process is necessary to assure the ceramic filter is not damaged. After this process is completed and the filter has cooled down the filter is subjected to a final blasting and quality check. The filter is then subjected to the testing procedure and the results are checked against the initial readings. The Bake/Blast Filter cleaning process restores the filter to a near new condition.

Stage One – Pneumatic
Blast Only
Filter is tested before cleaning for vacuum pressure (restriction) and it is weighed. The filter is then subjected to a pneumatic cleaning process with combined vacuum and air pressure to extract the particulates from the filter. Post blast the testing process is repeated and checked against the initial test results to ensure a sufficient differential to confirm the filter is as clean as possible.
Only recommended if time is limited or service interval is shorter than OEM.
Stage Two – Thermal Bake/Pneumatic Blast After a stage one blasting, the filter is subjected to a four stage eight hour thermal bake in a special oven. This four stage process is necessary to assure the ceramic filter is not damaged. After this process is completed and the filter has cooled down the filter is subjected to a final blasting and quality check. The filter is then subjected to the testing procedure and the results are checked against the initial readings. The Bake/Blast Filter cleaning process restores the filter to a near new condition.

How Independent Radiator stands out from the rest?

All filters are recorded by serial number in our database with the associated results from cleaning. High quality cleaning of DPFs and Industrial Filters is essential for maximizing time between cleanings. To learn more about DPF cleaning services in Albuquerque, New Mexico call +1(505)247-4222.

Additional services and parts:

If you are looking for gaskets, clamps, or your DPF or DOC needs to be repaired (i.e. replace broken ports, remove broken sensors, dry out oil soaked DPF’s and DOC’s) contact Independent Radiator today!